ACV 42a-1180-004-0 Модул за управление от волана за Hyundai 2007> / KIA 2010> с 24Pin/18Pin

Упътване

Упътване на опционален кабелен преход 42arc100

Note:

analog

connector:  24 Pin / 18 Pin Hyundai

check dip switches for retrofit HU

За автомобили без фабричен усилвател!

За автомобили без оригинална навигация!

vehicles with different Pin assignments and vehicles with OEM Sat Nav:

check the Pin assignment before connecting to avoid faults or defects on the vehicle or the retrofit device

diagnostic LED:

blue constant > Interface active +12V ignition power supply present

red > steering wheel remote control button function recognised

Съвместими модели:

Hyundai

Hyundai Azera 2011 - 2017

Hyundai Elantra 2011 - 2015

Hyundai H350 06/2015 -12/2019

Hyundai i10 (IA) 11/2013  - 12/2016

Hyundai i10 (IA) 01/2017 - 12/2019*

Hyundai i20 (GB) 12/2014 - 06/2018*

Hyundai i20 (GB) 07/2018 -09/2020*

Hyundai i30 (GD/GDH) 03/2012 - 05/2015

Hyundai i30 (GD/GDH) 05/2015 - 05/2017

Hyundai i40 (VF) 09/2011 - 05/2015

Hyundai i40 (VF) 05/2015 - 08/2018*

Hyundai i40 (VF) 10/2018 - 07/2019*

Hyundai i45 2009 - 2014

Hyundai i800 2007 - 2021*

Hyundai ix20 (JC) 11/2010 - 07/2015***

Hyundai ix20 (JC) 08/2015 - 07/2019***

Hyundai ix35 (EL) 03/2010 - 09/2013

Hyundai ix35 (EL) 09/2013 - 07/2015

Hyundai ix45 2013 - 2018*

Hyundai Santa-Fe (DM) 10/2012 - 11/2015

Hyundai Santa-Fe (DM) 12/2015 - 08/2018*

Hyundai Sonata (YF) 2009 - 2014

Hyundai Tucson (TL) 04/2010 - 06/2015

Hyundai Tucson (TL) 07/2015 - 07/2018**

Hyundai Tucson (TL) 07/2018 - 12/2020**

Kia

Kia Cee'd (JD) 06/2012 - 09/2015

Kia Forte 2012 - 2016

Kia Optima (TF) 06/2012 - 10/2013

Kia Optima (TF) 10/2013 - 10/2015

Kia Picanto (TA) 09/2011 - 04/2015

Kia Picanto (TA) 04/2015 - 03/2017

Kia Pro-Cee'd (JD) 07/2013 - 09/2015

Kia Rio (UB) 09/2011 - 01/2015

Kia Soul (AM) 09/2011 - 03/2014

Kia Soul (PS) 03/2014 - 11/2016

Kia Sorento (XM) 10/2012 - 03/2015

Kia Sportage (SL) 08/2010 - 03/2014

Kia Sportage (SL) 03/2014 - 01/2016

Following signals are provided:

Reimported vehicles or vehicles with different software may be incompatible in functions.

SWC

*vehicles 2016> without OEM Sat Nav

**vehicles with Continental OEM Sat Nav

***vehicles without OEM Sat Nav

***vehicles with OEM Sat Nav > item: 42a-1180-002

HU application:

Multilead different HU > item: 42arc100

General installation instructions:

Verification:

1: Check all operating functions and vehicle setting functions of the OEM HU.

2: Disconnect the OEM HU voltage-free.

3: Check all interface connections for correctness voltage-free.

Connection and connection sequence:

1: Check settings and hardware configuration of the interface voltage-free.

2: Check configuration of the HU connection cable voltage-free.

3: Connect the HU connection cable according to the operating instructions of the retrofit HU.

4: Connect all other connections according to the operating instructions of the retrofit HU.

5: Connect the entire installation to the vehicle with the main connection last.

6: Software configuration of the interface according to the instructions in the item text and in the manual.

7: Configure the retrofit HU according to the operating instructions of the retrofit device steering wheel remote control/camera/handsfree kit/antenna phantom powering and others.

8: Function test of steering wheel remote control and vehicle

Changes to the configuration of the interface and the HU connection cable:

1: Change configuration voltage-free

2: Reconnection see above 5 to 8

In case of malfunction of the interface or the vehicle:

1: Reinstall the OEM HU

2: Operate the OEM HU

3: Establish CAN bus shut down

4: Check the hardware configuration of the interface

5: Reconnection after CAN Bus shut down see above 5 and 6

More connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the manual are for orientation purposes only and for the information of trained specialist installer.

More connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions:

1: Connections and changes are to be carried out exclusively by trained specialist installer.

2: Connections and modifications must be checked before connection for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications.

3: Connections and modifications must be checked for function and correctness by measuring and comparing them with the vehicle's cable assignment diagram before connection.

4: Connections and modifications are made on the user's own responsibility without guarantee of function.

5: Connections and modifications are made on the user's own responsibility without any guarantee of damage to the vehicle, the retrofit device or the interface.

6: Modifications to the pre-assembled wiring harness may invalidate the product's warranty.