ACV 42a-1300-002-0 Модул за управление от волана за Toyota 10Pin/6Pin/28Pin analog

Note:

analog

connector: 10Pin / 6Pin / 28Pin Toyota

vehicles on year of construction limit > item: 42a-1300-00c with 20 Pin and 28 Pin wiring harness

vehicles with Matsushita / Fujitsu Ten OEM HU

vehicles without 360° OEM camera system

diagnostic LED:

blue constant > Interface active +12V ignition power supply present

red > steering wheel remote control button function recognised

Съвместими автомобили:

Toyota Auris (E150) 03/2010 - 01/2013

Toyota Avensis (T27) 01/2012 - 06/2015

Toyota Corolla (E170) 04/2014 - 12/2016

Toyota Fortuner 2011 - 2015

Toyota Hilux (N25) 12/2011 - 08/2016

Toyota Hilux (AN1P) 11/2016 - 09/2020

Toyota Hilux (AN1P) 10/2020 - 2025***

Toyota Innova 2011 - 2015

Toyota Prius ZVW30/ZVW35 (XW3) 04/2012 - 02/2016

Toyota Prius+ (XW3/XW4) 06/2012 - 01/2015

Toyota RAV4 (XA3) 04/2009 - 05/2010

Toyota RAV4 (XA3) 05/2010 - 02/2013

Toyota RAV4 (XA3/XA4) 04/2013 - 01/2016

Toyota RAV4 (XA3/XA4) 01/2016 - 12/2018**

Toyota Verso (AR2) 04/2009 - 01/2013

Toyota Verso (AR2) 04/2013 - 06/2018

Toyota Verso-S (XP12) 03/2011 - 07/2014

Toyota Verso-S (XP12) 07/2014 - 12/2015

Toyota Yaris (XP13) 11/2011 - 08/2014

Toyota Yaris (XP13) 09/2014 - 03/2017

Toyota Yaris (XP13) 04/2017 - 08/2020

The following signals are provided:

Reimported vehicles or vehicles with different software may be incompatible in functions.

SWC

*vehicles with rear view camera SWC Toyota different vehicles 28Pin USB/antenne/camera > item: 42xty015

**vehicles with 360° OEM camera system SWC Toyota vehicles 10Pin/6Pin/28Pin/24Pin Multilead > item 42xty019

***vehicles without JBL OEM HU

HU application:

Multilead different HU > item: 42arc100

Alpine 3,5mm jack connector > item: 42arc101

Blaupunkt 2010> 3,5mm jack connector > item: 42arc107

Blaupunkt 2010> Key1 / Key2 / (GND) connector > item: 42arc000

China Hu Key1 / Key2 / (GND) > item: 42arc000

Clarion 3,5mm jack connector > item: 42arc104

Digital Dynamics single lead connector > item: 42arc108

ESX Key1 / Key2 connector > item: 42arc000

JVC 3,5mm jack connector > item: 42arc104

JVC single lead connector > item: 42arc105

Kenwood single lead connector > item: 42arc105

Kenwood 2017> 3,5mm jack connector > item: 42arc107

Kenwood 2020> Key1 / Key2 / GND connector > item: 42arc000

Pioneer 3,5mm jack connector > item: 42arc107

Pioneer AVH/DMH/SPH 3,5mm jack connector > item: 42arc1072

Snooper Key1 / Key2 connector > item: 42arc000

Sony 3,5mm jack connector > item: 42arc107

XZent single lead connector > item: 42arc108

Zenec single lead connector > item: 42arc108

General installation instructions:

Verification:

1: Check all operating functions and vehicle setting functions of the OEM HU.

2: Disconnect the OEM HU voltage-free.

3: Check all interface connections for correctness voltage-free.

Connection and connection sequence:

1: Check settings and hardware configuration of the interface voltage-free.

2: Check configuration of the HU connection cable voltage-free.

3: Connect the HU connection cable according to the operating instructions of the retrofit HU.

4: Connect all other connections according to the operating instructions of the retrofit HU.

5: Connect the entire installation to the vehicle with the main connection last.

6: Software configuration of the interface according to the instructions in the item text and in the manual.

7: Configure the retrofit HU according to the operating instructions of the retrofit device steering wheel remote control/camera/handsfree kit/antenna phantom powering and others.

8: Function test of steering wheel remote control and vehicle

Changes to the configuration of the interface and the HU connection cable:

1: Change configuration voltage-free

2: Reconnection see above 5 to 8

In case of malfunction of the interface or the vehicle:

1: Reinstall the OEM HU

2: Operate the OEM HU

3: Establish CAN bus shut down

4: Check the hardware configuration of the interface

5: Reconnection after CAN Bus shut down see above 5 and 6

More connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the manual are for orientation purposes only and for the information of trained specialist installer.

More connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions:

1: Connections and changes are to be carried out exclusively by trained specialist installer.

2: Connections and modifications must be checked before connection for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications.

3: Connections and modifications must be checked for function and correctness by measuring and comparing them with the vehicle's cable assignment diagram before connection.

4: Connections and modifications are made on the user's own responsibility without guarantee of function.

5: Connections and modifications are made on the user's own responsibility without any guarantee of damage to the vehicle, the retrofit device or the interface.

6: Modifications to the pre-assembled wiring harness may invalidate the product's warranty.

Упътване

Упътване dip switch