Audison Prima APS 10 S4S 10" субуфер

Автомобилен 10 инчов 25cm SLIM субуфер за вграждане в бокс.

Изключително компактен размер - дълбок само 4,7" - 12cm, позволява работа в критично малък обем - 10 литра.

В комплекта защитна решетка

Мощност: 400W RMS / 800W Peak

Импеданс: 4 ohm

Чуствителност: 83,5dB SPL

упътване

спецификации

Prima compact subwoofer family expands with the introduction of the new 25 cm (10 in.) APS 10 S4S, optimized for enclosures with a reduced volume starting from 10 liters. The configuration of the single 4 ohm voice coil makes it ideal to be driven by the new AP F8.9 bit amplifier with built-in DSP that delivers an outstanding 260 W RMS with two channels bridged. Also interesting is the possibility to create custom enclosures with two APS 10 S4S driven by the AP 1D amplifier using the 540 W RMS delivered on the 2 ohm load resulting from the drivers connection in parallel.

Technical Specs

Size 250 mm

Power Handling - Peak 800 W

Power Handling - Continuous 400 W

Impedance 4 Ohm

Magnet Material HIGH DENSITY FLUX FERRITE

Voice Coil Ø 60 mm

Woofer Qes 0,75

Cone Material WATER REPELLENT PRESSED PAPER

Xmax 12.6 mm

Xmech 18 mm

Electric-acoustic Specs

Driver Displacement Volume 1.12

Re 3.7 Ohm

Fs 28.5 Hz

Vas 39.62 l

Mms 160 g

Cms 0.2 mm/N

BL 12.9 T•m

Qms 6.9

Qts 0.68

Le Standard 1.9 mH

Spl 83.5 dB

Тегло 5.24 kg

Features

Ultra-low profile (4.7 in. / 120 mm) for maximum installation flexibility. 

Designed to deliver maximum performance in a sealed enclosure starting from 10 lt.

Special-designed cone-dust cap-basket geometry guarantees a long linear excursion capability (11 mm, one-way) while keeping the mounting depth to a minimum.

Air vents on the basket underneath the spider, eliminating the need for the central pole vent allowing mounting close to the rear wall of the enclosure.

Massive motor assembly, optimized with FEM (Finite Element Modeling) for perfect control under high power, high excursion conditions.

Water-repellent treated paper 10 in. cone, featuring a profile developed with FEM simulation and optimized with the Klippel Scan Vibrometer.

Single voice coil design specifically developed to be combined with either AP F8.9 bit (2 CH bridged 260 W RMS) amplifiers taking advantage of the bass boost feature and integrated parametric equalizer of the built-in DSP.

Steel mesh grille and plastic gasket included.