- Наличност: В наличност
- Модел: HCP 5D
Купи с
Свързани продукти
5 канален усилвател с максимална мощност 1500W
Мощност RMS : 4x55W/4Ω или 4x90W/2Ω, + 1x160W/4Ω
Отношение сигнал/шум: 100dB (85dB при 1Wrms out)
Дъмпинг фактор: 100 / 250 за канал субуфер
Изключително компактни размери
D-Class 5 канален усилвател
Компактен дизайн използващ алуминием фрезован блок за по-добро топлоотдаване
Балансиран входен за отстраняване на индукционните електро шумове
Вход по високо ниво -Speaker level + стандартни RCA
Автоматично включване/изключване според входния сигнал по високо ниво
Спецификация:
Мощонст RMS 1%THD: 4x55W/4Ω или 4x90W/2Ω,
2x180w/4Ω
1x160W/4Ω или 1x280W/2Ω Изкривявания: 0,2% при 100Hz/4ohm
Честотна лента: 10 - 50 000Hz (10-500Hz Subwoofer)
Отношение сигнал - шум: 100dB (82dB при 1Wrms out)
Входна чуствителност: 0,6 - 5V RMS
Bass Boost 50Hz (0/6/12dB)
Hi-Pass Front 50-5000Hz/12dB/Oct
Hi-Pass Rear 50-5000Hz/12dB/Oct Band-Pass 50-500Hz
Lo-Pass Sub 50-500Hz/24dB/Oct,
Subsonic 25Hz /24dB/oct
Phase Control 0 ÷ 180
Remote Volume Control (adjust): (-50 ÷ 6) dB
Размер: 345*190*50mm 2.61kg
Предпазители: 2х25А
| Channels | 5 - 3 |
| POWER SUPPLY | |
| Power supply voltage / fuse: | 11 ÷ 15 VDC / 2 x 25 A |
| Idling current (power ON/OFF) | 2 A / 0.04 mA |
| Consumption @ 2 Ω, 14.4 VDC (Max Musical Power): | 30 A |
| Remote In: | 7 ÷ 15 VDC - 1 mA |
| ART | Automatic Remote Turn-On/Off with Speaker-In |
| AMPLIFIER STAGE | |
| Distorsion - THD (100 Hz @ 4 Ω) | 0.02 % |
| Bandwidth FRONT/REAR: | 10 ÷ 50k Hz |
| Bandwidth SUB: | 10 ÷ 500 Hz |
| S/N Ratio (A weighted @ 1 V): | 100 dB |
| Damping factor (100 Hz @ 4 Ω) FRONT/REAR: | 100 |
| Damping factor (100 Hz @ 4 Ω) SUB: | 250 |
| Pre-In sensitivity: | 0.2 ÷ 5 VRMS |
| Speaker-In sensitivity: | 0.8 ÷ 20 VRMS |
| Load impedance (MIN) | |
| @ 5 Ch: | 2 Ω |
| @ 3 Ch: | 4 Ω + 4 Ω + 2 Ω |
| Max size (mm / in.): | 345 x 190 x 50 / 13.58 x 7.48 x 1.97 |
| Weight (kg / lb.): | 2.61 / 5.75 |
| Adjustable Crossovers | yes |
| Output Power (RMS) @ 14.4 VDC, THD 1%: | |
| 5 Ch: | 55 W x 4 + 160 W x 1 (4 Ω) |
| 5 Ch: | 90 W x 4 + 280 W x 1 (2 Ω) |
| 3 Ch: | 180 W x 2 (4 Ω) + 160 W x 1 (4 Ω) |
| 3 Ch: | 180 W x 2 (4 Ω) + 280 W x 1 (2 Ω) |
| Output Power (RMS) @ 14.4 VDC, THD 10%: | |
| 5 Ch: | 65 W x 4 + 200 W x 1 (4 Ω) |
| 5 Ch: | 105 W x 4 + 330 W x 1 (2 Ω) |
| 3 Ch: | 210 W x 2 (4 Ω) + 200 W x 1 (4 Ω) |
| 3 Ch: | 210 W x 2 (4 Ω) + 330 W x 1 (2 Ω) |
| CEA 2006-A Ratings: | |
| RMS Power (4 Ω, ≤ 1 % THD + N, 14.4 V): | 50 W x 4 Ch + 150 W + 1 Ch |
| S/N Ratio (ref. 1 W output): | (50 W Ch) 83 dBA (150 W Ch) 85 dBA |
| Total Power | 1500 W |
| INPUTS: | PRE IN / SPEAKER IN |
| FRONT Ch. filters FULL: | Yes |
| Hi-Pass: | 50 ÷ 5k Hz @ 12 dB/Oct. |
| REAR Ch. filters FULL: | Yes |
| Hi-Pass: | 50 ÷ 5k Hz @ 12 dB/Oct. |
| Band-Pass: | 50 ÷ 500 Hz (Hi) @ 12 dB/Oct. 50 ÷ 5 kHz (lo) @ 12 dB/Oct. |
| SUB Ch. filter LO-PASS: | 50 ÷ 500 Hz @ 24 dB/Oct. |
| SUBSONIC (on/off): | 25 Hz @ 24 dB/Oct. |
| BOOST 50 Hz (adjust): | (0 ÷12) dB |
| Remote Volume Control: | -50 ÷ 6) dB |
| mm | in | |
| 345 | 13.58 | |
| 321 | 12.64 | |
| 190 | 7.48 | |
| 166 | 6.53 | |
| 50 | 1.97 |
The extruded aluminum heatsink provides high efficiency thermal performance; using the top side of the heatsink to effectively dissipate the heat generated by the electronic components. The internal temperature remains constant at all power levels.
Large array of filters customized for each model, to achieve maximum versatility: Lo-Pass, Hi-Pass, Band-Pass, Full Range, Subsonic, Bass Boost, Phase and Mono. Filtered pre-amplified outputs along with multiple adjustments are featured on the HCP 1D, offering the user endless connection possibilities with any source.
Special balanced input circuitry rejects electro-magnetic disturbances present on the Pre-amplified or Speaker level inputs. Power supply stage features a multiple winding transformer and Low-ESR 105°C capacitors, selected to ensure high efficiency and current capability.
Automatic Remote Turn-On/Off function, automatically turns the amplifier on and off with the OEM radio; eliminates the need for a remote signal from the source when using the Speaker-In. This function can also be disabled.