- Наличност: В наличност
- Модел: VENEZIA V4
Купи с
Свързани продукти
Специално проектиран за работа в морска агресивна среда
Доставящ максимална мощност при възможно най добри аудио характеристики и HiRes представяне.
Venezia V4 е 4-канален морски усилвател подходящ за работа с 1 или 2 комплекта тонколони или 1 субуфер
Мощност: 4x160W (4 Ω) / 4x290 W (2 Ω)
Изкривявания THD (100Hz @ 4Ω): <0,06%
Честотна лента: 10 ÷ 42 000 Hz
S/N Ratlo (A welghted @ 1 V): 102 dB
Дъмпинг фактор(100Hz @ 4Ω) 130
Максимална консумация - 48А
| Channels | 4 - 3 - 2 |
| POWER SUPPLY | |
| Power supply voltage | 9 ÷ 16 VDC |
| ldling current (power ON/OFF): | 1.6A / 0.04 mA |
| Consumption@ 1Ω, 14.4 VDC (Max Musical Power): | 48 A |
| Remote In: | 7 ÷ 15 VDC - 1 mA |
| AMPLIFIER STAGE | |
| Distorsion - THD (100Hz @ 4Ω): | <0,06% |
| Bandwidth: | 10 ÷ 42 kHz |
| S/N Ratlo (A welghted @ 1 V): | 102 dBA |
| Damping factor (100Hz @ 4Ω) | 130 |
| Pre-ln sensitivity: | 0.2 ÷ 5 VRMS |
| Pre-ln impedance: | 10kΩ |
| Load impedance (MIN) @4Ch: @3Ch: @2Ch: | 2 Ω 2 Ω + 2 Ω + 4 Ω 4 Ω |
| Adjustable Crossovers | yes |
| OUTPUT POWER (RMS) @ 14.4 VDC, THD 1% | |
| 4Ch | 160 W x 4 (4Ω) |
| 4Ch | 290 W x 4 (2Ω) |
| 3Ch | 160 W x 2 (4Ω) + 580 W x 1 (4Ω) |
| 3Ch | 290 W x 2 (2Ω) + 580 W x 1 (4Ω) |
| 2Ch | 580 W x 2 (4Ω) |
| Total Power | 1160 W |
| lnputs: | PRE IN |
| Pre Out | Full range |
| A Ch: | |
| A Ch. MONO (on/off): | Yes |
| By-pass: | Yes (Full) |
| Hi-Pass : | 50 ÷ 4k Hz @ 12dB/Oct |
| Lo-Pass: | 50 ÷ 4k Hz @ 12dB/Oct |
| B Ch: | Yes |
| B Ch. MONO (on/off): | Yes |
| By-pass: | Yes (Full) |
| Hi-Pass: | 50 ÷ 4k Hz @ 12dB/Oct |
| Lo-Pass: | 50 ÷ 4k Hz 12@ dB/Oct |
| Bass boost 50 Hz (adjust): | (0 ÷ 12) dB |
| mm | in | |
| A | 270 | 10.63 |
| B | 240 | 9.45 |
| C | 185 | 7.28 |
| D | 155 | 6.10 |
| E | 54 | 2.12 |
| Weight | kg | lb |
| 2.66 | 5.77 |
- Engineered and tested for marine application (UV, salt-fog, vibrations, high/low temperature, thermal shock) featuring IPX2 certification.
- ADC (Advanced D-Class) Technology 2Ω (1Ω for mono models) stable output stage providing Hi-Res certified audio performance with superior efficiency.
- Die-cast aluminum compact design with fan-less convection cooling system ensuring low operating temperature even at maximum power.
- Balanced fully-differential input circuitry to reject electromagnetic disturbances.
- Bridge operation mode to drive a subwoofer or to create a powerful dual-mono system.
- Built-in filter section protected by a polycarbonate panel suitable for any system configuration.
- Short-circuit, overload, and thermal protections with auto-resetting.
- Plug&Play Input and Output connections with safe-lock.
- Proprietary Plug&Play Power Supply Connector with safe-lock.
Hertz Advanced Class D architecture maximizes efficiency and power while minimizing heat and electromagnetic radiation – without penalizing sound quality! High-powered channels with bridging capability deliver the output levels needed in the marine environment.
Hi-Res certified performance, with an extended audio band up to 40 kHz.
Electronics components corrosion caused by exposure in wet environments is totally neutralized by the use of dedicated marinegrade (epoxy coated) PCB boards.
To satisfy the standards required by ASTM-B117, Hertz Marine products are tested with massive salt fog spray to ensure a complete resistance to corrosion, typical of this atmospheric agent.
This Hertz Marine amplifier is IPX2 certified when installed vertically with connections facing downward.
