МЕНЮ
Your Cart

ACV 42a-1180-002-0 Модул за управление от волана за Hyundai 2008> / KIA 2006> с mini ISO конектор

ACV 42a-1180-002-0 Модул за управление от волана за Hyundai 2008> / KIA 2006> с mini ISO конектор
ACV 42a-1180-002-0 Модул за управление от волана за Hyundai 2008> / KIA 2006> с mini ISO конектор
  • Наличност: В наличност
  • Модел: 42a-1180-002-0
49.99 € (97.77 лв.)
без ДДС: 49.99 € (97.77 лв.)
Купи
Право на връщане до 14 дни
Възстановяване на сумата и връщане на продукта до 14 дни.
Безплатна доставка над 80 EURO.
До ваш офис на Еконт или Спиди
Конкурентни цени
100% конкурентни цени и по-ниски цени
Бърза доставка
Получавате продукта до 1-2 работни дни.

Упътване

Упътване на опционален кабелен преход 42arc100


Note:


analog


connector:  ISO / Mini ISO

check dip switches for retrofit HU

blue/white: +12V Amp remote

vehicles without OEM amplified system CAN Bus controlled

diagnostic LED:

blue constant > Interface active +12V ignition power supply present

red > steering wheel remote control button function recognised


Съвместими модели:


Hyundai

Hyundai i10 (PA) 10/2008 - 12/2010

Hyundai i10 (PA) 01/2011 - 10/2013

Hyundai i20 (PB) 04/2009 - 06/2012

Hyundai i20 (PB) 07/2012 - 11/2014

Hyundai i30 (FD/FDH) 09/2007 - 10/2010

Hyundai ix20 (JC) 11/2010 - 07/2015*

Hyundai ix20 (JC) 08/2015 - 07/2019*

Hyundai Santa Fé (CM) 01/2010 - 09/2012

Hyundai Sonata (NF) 08/2008 - 03/2010


Kia

Kia Carens (BK) 10/2006 - 03/2013

Kia Cerato 2009 - 2013

Kia Carnival (VQ) 06/2006 - 12/2009

Kia Cee'd (ED) 10/2009 - 03/2013

Kia Pro-Ceed (ED) 10/2009 - 06/2012

Kia Sorento (JC) 07/2006 - 09/2009

Kia Sorento (XM) 10/2009 - 10/2012

Kia Soul (AM) 02/2009 - 09/2011

Kia Soul (AM) 09/2011 - 03/2014

Kia Venga (YN/YNS) 02/2010 - 01/2015

Kia Venga (YN/YNS) 01/2015 - 08/2019


Following signals are provided:

 

Reimported vehicles or vehicles with different software may be incompatible in functions.


SWC


*vehicles with OEM Sat Nav

 

HU application:


Multilead different HU > item: 42arc100

 

General installation instructions:


Verification:

1: Check all operating functions and vehicle setting functions of the OEM HU.

2: Disconnect the OEM HU voltage-free.

3: Check all interface connections for correctness voltage-free.


Connection and connection sequence:

1: Check settings and hardware configuration of the interface voltage-free.

2: Check configuration of the HU connection cable voltage-free.

3: Connect the HU connection cable according to the operating instructions of the retrofit HU.

4: Connect all other connections according to the operating instructions of the retrofit HU.

5: Connect the entire installation to the vehicle with the main connection last.

6: Software configuration of the interface according to the instructions in the item text and in the manual.

7: Configure the retrofit HU according to the operating instructions of the retrofit device steering wheel remote control/camera/handsfree kit/antenna phantom powering and others.

8: Function test of steering wheel remote control and vehicle


Changes to the configuration of the interface and the HU connection cable:

1: Change configuration voltage-free

2: Reconnection see above 5 to 8


In case of malfunction of the interface or the vehicle:

1: Reinstall the OEM HU

2: Operate the OEM HU

3: Establish CAN bus shut down

4: Check the hardware configuration of the interface

5: Reconnection after CAN Bus shut down see above 5 and 6


More connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the manual are for orientation purposes only and for the information of trained specialist installer.


More connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions:

1: Connections and changes are to be carried out exclusively by trained specialist installer.

2: Connections and modifications must be checked before connection for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications.

3: Connections and modifications must be checked for function and correctness by measuring and comparing them with the vehicle's cable assignment diagram before connection.

4: Connections and modifications are made on the user's own responsibility without guarantee of function.

5: Connections and modifications are made on the user's own responsibility without any guarantee of damage to the vehicle, the retrofit device or the interface.

6: Modifications to the pre-assembled wiring harness may invalidate the product's warranty.

Доставката на избрания от Вас продукт се извършва на посочен от Вас адрес или офис, със спедиторски фирми Еконт и Спиди, като в бланката за поръчка, следва да посочите и актуален телефон за контакт и email.
След обработване на поръчката Ви, наш консултант ще се свърже с Вас за потвърждение, както и за да уточните детайлите около доставката и за да получите отговори, при възникнали допълнителни въпроси или необходимост от консултация.

За всички налични продукти, доставката се извършва в срок от 1 до 2 работни дни, считано от датата на потвърждаване на поръчката.

За всички продукти над 80 EURO. доставката е безплатна до ваш офис на Еконт или Спиди.

Всички продукти в категория "Изолация", НЕ СА С БЕЗПЛАТНА ДОСТАВКА.


В случай, че не успеем да се свържем с Потребителят,  срока за изпълнение на доставката ще бъде удължен до потвърждаване на поръчката.