- Наличност: В наличност
- Модел: CS 250 S4
Купи с
Свързани продукти
10" (25см) автомобилен субуфер за вграждане в бокс.
Електроакустичият дизайн на говорителя позволява работа в бокс с минимален обем 16литра и е оптимизиран за качествен и плътан бас с редукция на нискочестотните дисторшън ефекти.
Номинален импеданс: 4 Ω
Мощност: 600W Peak / 300W continuos
Чувствителност: 84dB SPL
Размер на бобината: Ф35mm
Конус от полипропилен
Цена за 1бр
| Size mm (in.) | 250 (10) |
| Power Handling - Continuous W | 300 |
| Power Handling - Peak W | 600 |
| Impedance Ohm | 4 |
| No Filter Component | SUBWOOFER |
| Voice Coil Ø | 35 (1.38) |
| Magnet size D x d x h mm (in.) | 120 x 45 x 34 (4.72 x 1.77 x 1.34) |
| Weight of one component kg (lb.) | 3,795 (8.37) |
| Magnet | High density flux ferrite |
| Cone | Polyproyilene |
| Xmech mm (in.) | 16,5 (0.65) |
| D mm | 216 |
| Xmax mm | 12,5 |
| Re Ohm | 3,6 |
| Fs Hz | 30 |
| Le mH | 3,33 |
| Vas I | 34,5 |
| Mms g | 154 |
| Cms mm/N | 0,18 |
| BL T*m | 13,7 |
| Qts | 0,52 |
| Qes | 0,56 |
| Qms | 9,4 |
| Spl dB | 84 |
| A | 270 mm | 10.63 in. |
| B | 231 mm | 9.09 in. |
| C | 132 mm | 5.2 in. |
| D | 115 mm | 4.53 in. |
| E | 260 mm | 10.24 in. |
| F | 28,3 mm | 1.11 in. |
| Box Tech Data - Sealed Box | |
|---|---|
| Vb l(cu.ft.) | 16 (0,57) |
| Fb Hz | 50 |
| Qtc | 0,87 |
| W mm(in.) | 385 (15,16) |
| H mm(in.) | 385 (15,16) |
| D mm(in.) | 180 (7,09) |
| Mounting Hole - M | 231 (9,09) |
| Wood Thickness | 19 (0.75) |
| Panels Cut List - Sealed Box | ||
|---|---|---|
| A mm(in.) | 385 x 385 (15,16 x 15,16) | Qty 2 |
| B mm(in.) | 385 x 142 (15,16 x 5,59) | Qty 2 |
| C mm(in.) | 347 x 142 (13,66 x 5,59) | Qty 2 |
1. Electroacoustic design optimized for enclosures starting from 16 liters.
2. Fluid dynamic optimization system that drastically reduces the acoustic distortions generated by the air compression at high excursions.
3. Polypropylene cone and dust cap geometry engineered through FEM simulations for low frequency distortion reduction.
4. 35 mm 4 Ω voice coil wound on six layers of pure copper on a high thermal resistance glass fiber support.
5. Magnetic group geometry optimized with proprietary software for high undistorted SPL at high excursions.
6. Ideal for use in custom boxes that can be shaped around the subwoofer thanks to its compact size and lack of the decompression hole.
7. Terminal block featuring solid push contacts that accept cables up to 8 AWG to offer low wiring resistance and maximum ease of connection even in installations with multiple subwoofers.
8. Rubber protection of the magnetic assembly and high-strength ABS plastic gasket allowing the application of the optional grille for an elegant finish.
Решетката GC 250 е допълнителна опция