- Наличност: В наличност
- Модел: VENEZIA V4C
Купи с
Морските усилватели от серията VENEZIA са специално проектирани за работа в морска агресивна среда
Доставящи максимална мощност при възможно най добри аудио характеристики и HiRes представяне.
Venezia V4C е компактен 4-канален морски усилвател подходящ за работа с 1 или 2 комплекта тонколони или 1 субуфер
Мощност: 4x110W (4 Ω) / 4x190 W (2 Ω)
Изкривявания THD (100Hz @ 4Ω): <0,06%
Честотна лента: 10 ÷ 42 000 Hz
S/N Ratlo (A welghted @ 1 V): 102 dB
Дъмпинг фактор(100Hz @ 4Ω) 150
Максимална консумация - 21А
| Channels | 4 - 3 - 2 |
| POWER SUPPLY | |
| Power supply voltage | 9 ÷ 16 VDC |
| ldling current (power ON/OFF): | 1 A / 0.04 mA |
| Consumption@ 2Ω, 14.4 VDC (Max Musical Power): | 21 A |
| Remote In: | 7 ÷ 15 VDC - 1 mA |
| AMPLIFIER STAGE | |
| Distorsion - THD (100Hz @ 4Ω): | <0,06% |
| Bandwidth: | 10 ÷ 42 kHz |
| S/N Ratlo (A welghted @ 1 V): | 102 dB |
| Damping factor (100Hz @ 4Ω) | 150 |
| Pre-ln sensitivity: | 0.2 ÷ 5 VRMS |
| Load impedance (MIN) @4Ch: @3Ch: @2Ch: | 2 Ω + 2 Ω + 4 Ω 2 Ω 4 Ω |
| Weight (kg/lb): | 2.62 / 5.77 |
| Adjustable Crossovers | yes |
| OUTPUT POWER (RMS) @ 14.4 VDC, THD 1% | |
| 4Ch | 110 W x 4 (4Ω) |
| 4Ch | 190 W x 4 (2Ω) |
| 3Ch | 110 W x 2 (4Ω) + 380 W x 1 (4Ω) |
| 3Ch | 190 W x 2 (2Ω) + 380 W x 1 (4Ω) |
| 2Ch | 380 W x 2 (4Ω) |
| Total Power | 760 W |
| lnputs: | PRE IN |
| Pre Out FULL range (FRONT) | Yes |
| FRONT Ch. filters FULL: | Yes |
| Hi-Pass : | 50 ÷ 4k Hz @ dB/Oct |
| Lo-Pass: | 50 ÷ 4k Hz @ dB/Oct |
| REAR Ch. filters FULL: | Yes |
| Hi-Pass: | 50 ÷ 4k Hz @ dB/Oct |
| Lo-Pass: | 50 ÷ 4k Hz @ dB/Oct |
| FRONT Ch. MONO (on/off): | Yes |
| REAR Ch. MONO (on/off): | Yes |
| BOOST 50 Hz (adjust): | (0 ÷ 12) dB |
| mm | in | |
| A | 205 | 8.07 |
| B | 175 | 6.88 |
| C | 155 | 6.1 |
| D | 125 | 4.92 |
| E | 40.5 | 1.59 |
Hertz Advanced Class D architecture maximizes efficiency and power while minimizing heat and electromagnetic radiation – without penalizing sound quality! High-powered channels with bridging capability deliver the output levels needed in the marine environment.
Hi-Res certified performance, with an extended audio band up to 40 kHz.
Electronics components corrosion caused by exposure in wet environments is totally neutralized by the use of dedicated marinegrade (epoxy coated) PCB boards.
To satisfy the standards required by ASTM-B117, Hertz Marine products are tested with massive salt fog spray to ensure a complete resistance to corrosion, typical of this atmospheric agent.
This Hertz Marine amplifier is IPX2 certified when installed vertically with connections facing downward.