- Наличност: В наличност
- Модел: MP 300 D4.3 PRO
Купи с
Свързани продукти
300 (12) mm (in.) | Subwoofers | 1200 W | 4+4 Ohm
Автомобилен 12" 30cm субуфер с двойна намотка 2 х 4Ω
Подходящ за изграждане на мощни HiFi озвучителни системи.
Конус V-cone® от пресован картон примесен с минерални частици и широка 2,5" 4 слойна бобина
Алуминиево антирезонансно лято шаси
Мощност: 1200W peak / 600W Continuous
Импеданс: 4+4 Ω
Чувствителност: 86dB
| Size mm (in.) | 300 (12) |
| Power Handling - Continuous W | 600 |
| Power Handling - Peak W | 1200 |
| Impedance Ohm | 4+4 |
| No Filter Component | Subwoofers |
| Voice Coil Ø | 65 (2,5) |
| Magnet size D x d x h mm (in.) | 165 x 75 x 35 (6.5 x 2.95 x 1.38) |
| Weight of one component kg (lb.) | 8,63 (19.03) |
| Magnet | High density flux ferrite |
| Cone | Water-repellent pressed paper |
| Xmech mm (in.) | ±27 (1.06) |
| D mm | 260 |
| Xmax mm | 17 |
| Re Ohm | 1,9 |
| Fs Hz | 24 |
| Le mH | 1,6 |
| Vas I | 74 |
| Mms g | 235 |
| Cms mm/N | 0,19 |
| BL T*m | 12 |
| Qts | 0,42 |
| Qes | 0,45 |
| Qms | 5,9 |
| Spl dB | 86 |
| A | 321 mm | 12.64 in. |
| B | 287 mm | 11.3 in. |
| C | 187 mm | 7.36 in. |
| D | 164 mm | 6.46 in. |
| E | 327,5 mm | 12.89 in. |
| F | 59 mm | 2.32 in. |
1. Ergonomic, compact design, specifically developed for sealed box enclosures starting at 27 lt volume.
2. CCAW, 65 mm (2,5”) 4-layer voice coil, capable of handling 1200 W musical power. The 4 Ω + 4 Ω DVC impedance configuration improves versatility to match any amplifier system.
3. Voice coil wound on TIL-P material with venting holes behind the winding. This combines efficient heat dissipation with a high Qms factor (low mechanical loss) for bursting dynamic sound.
4. Exponential V-cone® with optimized geometry for high cone stiffness and strong resistance to deformation even at maximum excursions.
5. Boundary Free IIR rubber surround, for higher SPL performance while keeping a nominal external diameter.
6. Mineral-injected paper cone, for superior rigidity and damping.
7. Extremely acoustically transparent anti-resonant aluminium alloy basket with six-spokes standing structure and built-in venting holes underneath the spider.
8. CNC machined elegant diamond-cut basket edge featuring the Hertz logo.
9. Terminal block accepting cables up to 8 AWG to provide ultra-low wiring resistance in low impedance configurations. A plastic cover prevents any accidental short-circuit.
10. Possibility to secure the subwoofer to the box wall, taking full advantage of its minimal dimensions.
11. High performance compact motor with a superior magnetic field transferred to the coil.
The exclusive technology providing the traceability of the Mille.3 products from their birth on. Once the test phase has been passed, the code linked to destination country/market is applied. When purchasing the product, by scanning the code, the user can check through the web the information about the product and can log into the registration page.
The exponential profile gets very close to the perfect one, providing exceptional dispersion.